spacer.gif round
Your Packaging PARTNER
CREATIVE Retailing
TARGETED Solutions
Searchspacer spacerAdvanced Search
spacer spacer
Home - Products - Bag Packaging Equipment - Sealers - Models 90-H Closer and 92-H Sealer-Closer
Models 90-H Closer and 92-H Sealer-Closer
Both of these Sealer models use hot air to seal any size open mouth pinch bottom bags and produce securely closed bags. Bags can be fed manually or automatically. Fully automatic placement, filling, reclaiming and guidance to the closer can be accomplished when used with Smurfit-Stone's Model 602E Pinch Bottom Applicator. A rate of up to 8 bags a minute is possible when used with an automatic applicator. Operating manually, these models can seal up to 12 bags a minute with one worker, up to 16 bags with two, and up to 26 bags with three.
Features / Benefits
  • low wattage air heater
  • factory-set air regulation for constant flow and pressure
  • heated final fold guide to reduce hot melt build up and resultant jamming
  • fully guarded
  • wide stance pedestal provides stability
  • rack and pinion adjustment of pedestal height
  • locking pivot
  • variable speed drive
  • primary fold guide pivots to allow easy access to plenum chamber and fold guides
  • direct drive assemblies pivot for routine maintenance
  • sealer (92-H) bar controls and heater controls shut down and provide visual alarm when failures in air supply or in heater occur
  • NEMA 12 dust tight specified
92-H Sealer Features
  • cast aluminum sealer bar heaters provide maximum heat transfer
  • 40 inch long sealer bar allows for lower temperatures and faster speeds
  • cleaner, pulsating sealer assembly reduces air-borne dust
  • bag top cleaner
  • bag top printer
  • conveyor starter controls
  • explosion proof drive motor
  • casters
Technical Specifications
  • bag capacity: Full range of pinch bottom bag sizes
  • closing rate: manual - up to 12 bags a minute with one worker, up to 16 with two workers, and up to 26 bags a minute with 3 workers; automatic - (with applicator) up to 8 bags a minute
  • shipping weight: 90-H - 1280 lbs., 92-H - 1420 lbs.
  • 90-H Electrical requirements: 230/VAC 3 ph, 50/60 Hz, 16.5 amps
  • optional: 460 VAC, 3 ph, 50/60 Hz, 8.3 amps
  • air requirements: 7 scfm free air @ 80 psig
  • 92-H Electrical requirements: 230 VAC, 3 ph, 50/60 Hz, 27.4 amps
  • optional: 4360 VAC, 3 ph, 50/60 Hz, 13.7 amps (requires 15 KVA, 3 ph transformer)
  • air requirements: 7 scfm free air at 80 psig
Specifications subject to change.

Contact Us for more information.

spacer Related Links spacer
spacer spacer
> Model Clean-Pak 7000 Ultrasonic Sealer
> Model US1000 Portable Ultrasonic Sealer
> Model US2000 Ultrasonic Sealer
> Models US2001 and US2002 Ultrasonic Sealers
> Model 110 AP Automatic Palletizer
> Models 506 and 507 Valve Bag Applicators
> Bulk Bag Filling System Model P-1000
> Model 511 Valve Bag Applicator
> Model 720 MP
> Force Flow Packer Model 770 GWC-II
spacer spacer
spacer Contact Us spacer
Click here to email us for more information.
Or if you are in the US or Canada, call us at 877-772-2932
spacer spacer
spacer Ask the Experts spacer
spacer spacer
spacer spacer
spacer spacer
Find out more about packaging...

Help | Legal | Privacy | Copyright 2001 Smurfit-Stone Container Corporation. All rights reserved.