Packaging
Systems
Links:

Home

Products

About Us

Service

Request
Information

FAQ's

Contacts

E-mail
Packaging
Systems at pkgequipment
@smurfit.com


Copyright
© 2000
Smurfit-Stone Container Corporation

LEGAL

PRIVACY

WEBMASTER

Fully automatic side belt case sealer

Automatically closes the top flaps of uniform size cases and then seals the top and bottom major flaps with hot melt adhesive or tape.

Acrobat™PDF version of this sheet

Features & Specifications of the 1023 Case Sealers
Features:
  • Fully-automatic, requires no operator
  • Hand cranks allow fast and easy changeover – no tools required
  • Cantilevered head mounting for easy access
Machine Options:
  • Casters
  • Auto case indexer
  • Jet air blast for minor flap control
  • Selector switch for top/bottom or top-only sealing
  • Extra large models
  • Discharge conveyor
  • Extension legs
  • Stainless steel construction
Operation:Cases are presented to the machine via customer supplied conveyor. The cases must have the bottom flaps closed with the top major flaps in a vertical position. The minor flaps must also be in a vertical position or slightly tucked inside the major flaps. As the side belts move the cases through the machine, the top minor flaps are tucked and the lower major flaps are opened to clear the low-profile glue applicator, where hot melt adhesive is applied to the top minor and bottom major flaps. The top and bottom major flaps are then plowed closed and sealed as the case moves through the compression station.Product Weight – Up to 40 lbsOperation Speed: Up to 30 cases per minute, depending upon case size. Belt is approximately 63 linear feet per minute.Power Requirements:
  • Electrical – 230/460/3/60
  • Air – 80 PSI (clean dry air)
  • Max Free Air Consumption – 0.5 cfm per cycle
Shipping Weight – 700 lbs (approximately)
Standard Case Size Range in inches
Range L W D
Min. 6 6.5 4.5
Max. 24 18 20
Larger sizes available

Model 1023 with glue

Click to enlarge drawing


Model 1023T with tape

Click to enlarge drawing